So I decided to make a mini travel-sized loom to take and I wanted to share the process with you:
Wood pieces 1" thick cut to desired size (I cut one piece 3" width by 6"length, and two smaller pieces each 3" width by 1.5"-approx.-in length)
2 Eye Screws, 4" bolts, two wing nuts to fit bolts
Wood Stain (if desired)
Wood Glue and 2 clamps to secure while drying
Drill, Sand paper or electric sander
First, cut your wood to dimensions listed in supply section above:
Next, if desired, sand edges and surface of wood till smooth and stain with wood stain in desired shade:
When the stain has dried, use wood glue to connect the 2 smaller pieces to the top side ends of larger wood piece and add clamps to hold in place while drying as shown:
After the glue has dried, drill 4 holes into the each end of the two smaller wood pieces- as shown:
Add two nails to each outer edge (if desired - not shown) to use to secure thread when threading the loom....
There you have it. A mini bead loom to take along with you!
Let me know if anything is unclear in comment section and I will get right back to you. Also, if you want to make a larger loom, check out my other tutorial Here!
Till next time,